Circuit Breaker Contact Resistance Meters
----------部分中文介紹產(chǎn)品已停產(chǎn)或參數(shù)有變更,內(nèi)容僅供參考。

Circuit Breaker Contact Resistance Meters

       

DC Micro-Ohmmeter

 
       
View Full Specs

The Auto-Ohm-200 S3 is Vanguard’s fourth generation, microprocessor-based, true DC micro-ohmmeter. It is designed for testing EHV circuit-breaker contact resistances, bushing contact joints, welding joints, or for any low-resistance measuring application. This high current and very lightweight (16.8 lbs/ 7.6 Kg) micro-ohmmeter is designed to meet the requirement for testing circuit breaker contact resistance.

  • 。 Very lightweight: 16.8 lbs. (7.6 Kg)
  • 。 Measures circuit breaker contact resistance with safety ground on (with the Dual Ground option)
  • 。 Stores test records on-board or on external USB Flash drive
  • 。 1 to 200A programmable test current
       

DC Micro-Ohmmeter

 
       
View Full Specs

The DMOM-200 S3 is Vanguard’s fourth generation, microprocessor-based, true DC micro-ohmmeter. It is designed for testing EHV circuit-breaker contact resistances, bushing contact joints, welding joints, or for any low-resistance measuring application. This high current and very lightweight (19.8 lbs/ 8.9 Kg) micro-ohmmeter is designed to meet the requirement for testing circuit breaker contact resistance.

  • Very lightweight: 19.8 lbs. (8.9 Kg)
  • Measures circuit breaker contact resistance with safety ground on (with the Dual Ground option)
  • Stores test records on-board or on external USB Flash drive
  • 1 to 200A programmable test current
  • Built-in 2.5" wide thermal printer
       

DC Micro-Ohmmeter

 
       
View Full Specs

The DMOM-600 is specifically designed for testing EHV circuit-breaker contact resistances, bushing contact joints, welding joints, or for any low-resistance measuring application. This high current and very lightweight (33 lbs/ 15 Kg) micro-ohmmeter is designed to meet the requirement for testing circuit breaker contact resistance.

  • Measures circuit breaker contact resistance with safety ground on (with the Dual Ground option)
  • Stores test records on-board or on external USB Flash drive
  • 10 to 600A programmable test current
  • Built-in 2.5" wide thermal printer
       

Safety Ground Tester

 
       
View Full Specs

The Vanguard SGT-600 Safety Ground Tester is a 600A DC micro-ohmmeter designed specifically to measure the resistance of protective in-service grounding and jumper cable assemblies. The SGT-600 can measure the resistance of the grounding cables, clamps and ferrules. The measured resistance values can be compared against the calculated values (using the ASTM 2249-03 standard) and a Pass/Fail  result can be printed along with the measured resistance values.