VBT-75p Vacuum Bottle Tester
----------部分中文介紹產(chǎn)品已停產(chǎn)或參數(shù)有變更,內(nèi)容僅供參考。

VBT-75p

Vacuum Bottle Tester

9116-UC [VBT-75P]

The VBT-75P is a microprocessor-based, portable 75 kV dc vacuum bottle tester. This lightweight, portable tester is designed for testing circuit-breaker vacuum bottles in the field and at the shop.
Test voltages can be selected from 10 kV dc to 75 Kv dc in 1 Kv steps. The high voltage test time can be set from 5 seconds to 2 minutes. The test voltage is raised to the selected voltage and held for the test time duration. After the test time duration has elapsed and the leakage current did not pass the preset value of 100 μA, 200 μA, or 300 μA, the test voltage is returned to zero and a "Pass" message is displayed. If a flash-over condition occurs, such as bottle failure, the test voltage is immediately turned off, a “Failure” message is displayed on the LCD screen, and the “TEST FAIL” LED light on the unit is also illuminated.
The presence of high voltage is indicated by an audible tone and an illuminated “HIGH VOLTAGE” LED light. For additional operator safety, an “ARM” switch must be held down during testing.
The VBT-75P features a back-lit LCD screen (20 characters by 4 lines) that is viewable in both bright sunlight and low-light levels. A rugged, 16-key, membrane keypad is used to control the unit. Test results can be printed on the built-in 2-1/2" wide thermal printer.
The VBT-75P can store up to 84 records of 16 readings in Flash EEPROM. Test records can be retrieved and printed on the built-in thermal printer, or they can be transferred to a PC via the unit’s RS-232C interface. Windows?-based software is provided with each unit. Using this software, test records can be retrieved from the VBT-75P and then stored on the PC for future analysis and report generation. Additionally, test records can be exported in PDF, Excel, and XML formats.
The VBT-75P is furnished with a 10-foot test cable that is terminated with a quick-disconnect test clip. A transportation case is also included.

  • Automatic testing
  • 10 kV - 75 kV DC output in 5 kV steps
  • Selectable test time duration from 5 seconds to 2 minutes
  • Built-in 2-1/2" thermal printer
  • Stores 84 records internally (of 16 readings each)
  • Digital voltage and current display
  • Failure indicator LED
  • Very lightweight (12 lbs./5.44 Kg)
       

VBT-75P

Cables

 
       
       

VBT-75P

Technical Specifications

 
       
PHYSICAL SPECIFICATIONS Dimensions: 17”W x 10.5”H x 6.5” D (42.7 cm x 26.9 cm x 16.5 cm)
Weight: 12 lbs. (5.44 Kg)
INPUT POWER 90 - 240 Vac, 2A, 50/60 Hz
OUTPUT VOLTAGE 10kV - 75 kV dc in 5 kV steps; accuracy: 1.5%
OUTPUT  RIPPLE VOLTAGE 3% max
DISCHARGE TIME maximum discharge time for internal high voltage is 3 seconds
DISPLAY back-lit LCD (20 characters x 4 lines); viewable in bright sunlight and low-light levels
FAILURE INDICATOR failure indicator LED illuminates when test current exceeds 100 μA, 200 μA, 300 μA (programmable)
KEYPAD rugged membrane keypad (10 alpha-numeric keys, 6 function keys)
INTERNAL DATA STORAGE stores up to 84 records of 16 readings each
PRINTER built-in 2-1/2” wide thermal printer
PC SOFTWARE Windows?-based software is included with purchase price
COMPUTER INTERFACE one RS-232C port
TEMPERATURE Operating: -10°C to +50°C (+15°F to +122°F)
Storage: -30°C to +70°C (-22°F to +158°F)
HUMIDITY 90% RH @ 40°C (104°F) non-condensing
ALTITUDE 2,000 m (6,562 ft) to full safety specifications
CABLES one 10-foot high-voltage cable, one 10-foot high voltage return cable, one ground cable, one power cord
FURNISHED ACCESSORIES shipping case is included
WARRANTY one year on parts and labor
Specifications are valid at nominal voltage and ambient temperature of +25?C (+77?F).
Last updated on March 18, 2015