Current Transformer Testers
----------部分中文介紹產(chǎn)品已停產(chǎn)或參數(shù)有變更,內(nèi)容僅供參考。

Current Transformer Testers

Current Transformer Test Set

Part Number(s)
9045-UC [110V]
9046-UC [220V]
View Full Specs

The Model EZCT-10 is a microprocessor-based, current-transformer test set. This rugged and portable test set measures excitation current, turns ratio and winding polarity on single- and multi-ratio current transformers. Current transformers can be tested in their field-mounted configuration, eliminating the need to remove bushings or current transformers from the host equipment.

  • Perform Saturation, Ratio and Polarity Tests
  • Fully Automated
  • Comprehensive Graphic and Tabulated Test Reports
  • Plot Multiple Saturation Curves
  • Store 64 Records (of 10 Saturation Curves)
  • Computer Interface

Current Transformer Test Set

Part Number(s)
9027-UC [110V]
9044-UC [220V]
View Full Specs

The EZCT-2000A is Vanguard’s third-generation microprocessor-based current transformer test set. The EZCT-2000A can perform the current transformer (CT) excitation test, measure the CT winding resistance and CT current-ratio automatically. All of the EZCT-2000A’s test leads can be connected to the CT output terminals (X1, X2, X3, X4 and X5), eliminating the need for lead switching during testing. Test voltage output is automatically raised and lowered by the EZCT-2000A without any operator intervention.

  • Perform Saturation, Ratio and Polarity Tests
  • Perform CT Winding Resistance Test
  • Fully Automated
  • Test record header information including company, substation name, circuit ID, manufacturer, CT serial number, operator name, and test record-comments
  • Plot Multiple Saturation Curves
  • Store 140 Records (of 10 Saturation Curves)
  • Computer Interface
  • USB Flash drive interface
       

Current Transformer Test Set

 
       
View Full Specs

The EZCT-2000C Plus is Vanguard’s third-generation microprocessor-based current transformer test set. Designed specifically for CT testing, the EZCT-2000C Plus has the following outstanding features that can greatly increase productivity and save time during the commissioning stage:

  • Performs CT excitation, current-ratio, polarity, and phase angle tests
  • Measures insulation resistance and winding resistance of the CT seconday windings
  • Measures the CT's secondary burden
  • Test record header information including company, substation name, circuit ID, manufacturer, CT serial number, operator name, and test record-comments
  • Built-in 4.5-inch wide thermal printer
  • Plot Multiple Saturation Curves
  • Stores up to 128 CT test plans and 140 test records internally
  • USB, Bluetooth, and USB Flash drive interface
       

Current Transformer Test Set

 
       
View Full Specs

The EZCT S2A is Vanguard’s third-generation, microprocessor-based, current transformer test set. The EZCT S2A can perform the current transformer (CT) excitation, CT current-ratio, and winding polarity tests automatically. The EZCT S2A automatically raises and lowers the excitation test voltage without any operator intervention. With up to 1500 Vac excitation test voltage available, the EZCT S2A can easily perform excitation tests on very large CT’s.

  • Perform Saturation, Ratio and Polarity Tests
  • Fully Automated
  • Comprehensive Graphic and Tabulated Test Reports
  • Plot Multiple Saturation Curves
  • Store up to 128 CT test plans
  • Store up to 10 test definitions in each test plan
  • RS-232C and USB computer interfaces
  • Built-in 4.5 inch thermal printer
  • USB Flash drive interface