SGT-600
----------部分中文介紹產(chǎn)品已停產(chǎn)或參數(shù)有變更,內(nèi)容僅供參考。

SGT-600

Safety Ground Tester

9112-UC

The Vanguard SGT-600 Safety Ground Tester is a 600A DC micro-ohmmeter designed specifically to measure the resistance of protective in-service grounding and jumper cable assemblies. The SGT-600 can measure the resistance of the grounding cables, clamps and ferrules. The measured resistance values can be compared against the calculated values (using the ASTM 2249-03 standard) and a Pass/Fail  result can be printed along with the measured resistance values.

       

SGT-600

Technical Specifications

 
       
TYPE Safety Ground Tester
PHYSICAL SPECIFICATIONS Dimensions: 16-3/4" W x 12-1/2" H x 12" D (42.7 cm x 32 cm x 30.5 cm)
Weight: 19.8 lbs. (8.9 Kg)
INPUT POWER 100 – 240 Vac, 50/60 Hz
RESISTANCE READING RANGE 1 micro-ohm to 1000 milliohms
(max 1.5 milliohms @ 600A, 450 milliohms @ 10A, 1000 milliohms @ 1A)
TEST CURRENT RANGE 10A – 600A (selectable in 1A steps); thermally protected DC power supply
ACCURACY 10A – 49.9A: 1% ±2 micro-ohms, 50A – 600A: 1% ±1 micro-ohm
TEST VOLTAGE 5 Vdc
DISPLAY Back-lit LCD screen (128 x 64 pixels); viewable in bright sunlight and low-light levels
KEYPAD Rugged, 44-key "QWERTY" membrane keypad
INTERNAL TEST RECORD STORAGE 128 test records. Each record can contain up to 64 readings
EXTERNAL TEST RECORD STORAGE Up to 999 test records on external USB flash drive
PC SOFTWARE Windows?-based analysis software is included with purchase price
COMPUTER INTERFACES One RS-232C PC interface, one USB flash drive interface
PRINTER Built-in 2-1/2” wide thermal printer
SAFETY
TEMPERATURE
Operating: -10°C to +50°C (+15°F to +122°F)
Storage: -30°C to +70°C (-22°F to +158°F)
HUMIDITY 90% RH @ 40°C (104°F) non-condensing
CABLES
sensing leads, hand probes, power cord, ground cable
ALTITUDE 2,000 m (6,562 ft) to full safety specifications
OPTIONS Shipping case
WARRANTY One year on parts and labor
Specifications are valid at nominal voltage and ambient temperature of +25?C (+77?F).