INSULATED JUMPER CABLE - 15KV, 25KV, 35KV
• 15KV Jumper cable available in four sizes
• Conductive strand shield improves service life, dielectric strength and eliminates internal corona
• Insulation is mold cured from ethylene propylene rubber (EPR) and resists abrasion, heat, mois-
ture, and ultra violet rays
• Flexible at low temperatures
• Note: These cables are not intended for use as permanently installed or portable power cable. To
avoid possible cable damage and high leakage currents, these cables must be positioned away
from grounded surfaces or energized conductors other than those to which they are connected.
| CAT NO |
SIZE AWG |
STRANDING |
RATING AMPS |
WEIGHT PER 1,000 FT |
| 12198 |
#2 |
259 |
200 |
440 LBS |
| V 12199 |
1/0 |
427 |
250 |
600 LBS |
| 1 12200 |
2/0 |
427 |
300 |
710 LBS |
| 12201 |
4/0 |
532 |
400 |
1,050 LBS |
| V 6874 |
2/0 |
427 |
300 |
903 LBS |
| V 6859 |
1/0 |
427 |
250 |
1,130 LBS |
JUMPER CABLE FERRULE ASSEMBLES
WITH 5/8-11 NC THREADS
• Tin plated copper
• Ferrule has flat side for use with jumper head
| CAT NO |
CABLE SIZE |
LBS |
| 13100 |
#2 |
0.3 |
| 13101 |
1/0 |
0.3 |
| 13102 |
2/0 |
0.3 |
| 13103 |
4/0 |
0.4 |
