MECHANICAL JUMPER CLAMPS
• Two sizes available - 6 solid through 556.5 MCM and 6 solid through 954 ACSR
• Easy to install
• Thrust bearing design provides low friction for tightening clamp
• Bronze clamping rings have serrated contact surface to insure good electrical contact with conductors
• Two styles available...
Yellow handles are made from bright yellow, impact resistant modified polyolefin material
Clear handles are made from a high impact plastic material
• Grip tabs are molded in for easy gripping with rubber gloves
• Conductor clamp is machined from brass alloy
• Rated for 400 amps continuous current maximum rating - this rating is dependent on the rating of the
jumper cable used with the clamps
| CAT NO |
DESCRIPTION |
MAIN LINE RANGE |
JUMPER CABLE RANGE |
LBS |
||
| |
|
MAXIMUM |
MINIMUM |
MAXIMUM |
MINIMUM |
|
| 13004 |
MEDIUM RANGE JUMPER CLAMP YELLOW |
556-5 MCM OR 477 ACSR |
6 SOLID .162 DIA |
4/0 15KV* |
#2 |
1.6 |
| 13765 |
MEDIUM RANGE JUMPER CLAMP CLEAR |
556-5 MCM OR 477 ACSR |
6 SOLID .162 DIA |
4/0 15KV* |
#2 15KV |
1.6 |
| 11000 |
LARGE RANGE JUMPER CLAMP YELLOW |
954 ACSR 36/1 |
6 SOLID .162 DIA |
4/0 15KV 1/0 35KV |
#2 |
2.7 |
| 13768 |
LARGE RANGE JUMPER CLAMP CLEAR |
954 ACSR 36/1 |
6 SOLID .162 DIA |
4/0 15KV 2/0 25KV 1/0 35KV |
#2 15KV |
2.7 |
| *NOTE: CLAMPS
WILL ACCOMMODATE 4/0 STR. 15KV CABLE ONLY IF EPR (ETHYLENE, PROPYLENE RUBBER) INSULATED CABLE IS USED. |
||||||
| **NOTE: IF
25KV OR 35KV CABLE IS REQUIRED LARGE RANGE CLAMPS MUST BE USED. |
||||||
