西班牙LIFASA電容器
您現在的位置:首頁 >> 新產品發布 >> 美國Hastings工具 >> 內容

美国hastings TRANSFORMER GINS 5800-1

時間:2013-7-28 11:02:58 點擊:

  核心提示:TRANSFORMER GINS?nbsp; Two styles - light duty and heavy duty insulated gins?nbsp; Fiberglass shafts...

TRANSFORMER GINS
?nbsp; Two styles - light duty and heavy duty insulated gins
?nbsp; Fiberglass shafts
?nbsp; Gin metal fittings are high strength aluminum alloy - Bolts are plated steel - Chain is high test alloy steel
?nbsp; Gin comes with chain binder or ratchet strap
?nbsp; All gins show working load limit
?nbsp; Nylon straps should be inspected prior to each use for wear, cuts, and degradation from exposure to ultra
violet rays.  Suspect straps should be replaced before use.

CAT NO 揃?揅?ADDITIONAL - DIMENSION
INFORMATION
WORKING
LOAD LIMIT
LBS
5800-1 24 1/4?10?CENTER OF EYE 8?FROM FACE OF POWER POLE.
INSIDE OF FIBERGLASS MAST IS 1?FROM FACE OF POWER POLE.
1300 LBS 8.6
5742-15 SAME AS 5800-1 EXCEPT WITH CHAIN BINDER 1300 LBS 10.6
5800-3 36?18?CENTER OF CLEVIS IS 11 1/2?FROM FACE OF POWER POLE.
INSIDE OF FIBERGLASS MAST IS 4 1/2?FROM FACE OF POWER POLE.
2500 LBS 24.0
12707 SAME AS 5800-3 EXCEPT WITH CHAIN BINDER 2500 LBS 26.0
5800-4 48?27?CENTER OF CLEVIS IS 11 1/2?FROM FACE OF POWER POLE.
INSIDE OF FIBERGLASS MAST IS 4 1/2?FROM FACE OF POWER POLE.
2500 LBS 33.0
11200 SAME AS 5800-4 EXCEPT WITH CHAIN BINDER 2500 LBS 35.0
5049 REPLACEMENT NYLON STRAP - 2?WIDE X 44?LONG - WITH HOOK 0.8
7253-5 CANVAS STORAGE BAG FOR 5742-15 GIN 1.0

WORKING LOAD LIMIT
The working load limit is the maximum load which should ever be applied to the product under any condition. 
The working load limit is based on a load being uniformly applied in a straight line pull.
CAUTION:  It is the responsibility of the ultimate user to determine a working load limit for each application. 
Many factors should be considered:  included among, but not limited to, loads applied, speed of operation,
acceleration or deceleration, length of rope or cable, shock loads, abrasion, corrosion, number, size, condition
and location of drums and sheaves, facilities for inspections, and the danger to life and property should a rope
or cable break.

 

TRANSFORMER GINS
?nbsp; Small metal gins are made of ductile iron
?nbsp; Small metal gins are available with a chain binder or a ratchet strap
?nbsp; Large metal gin is made of cast aluminum alloy
?nbsp; Large metal gin is only available with a chain binder
?nbsp; Gin design allows you to straddle cross arm
?nbsp; Nylon straps should be inspected prior to each use for wear, cuts, and degradation
from exposure to ultra violet rays.  Suspect straps should be replaced before use.

CAT NO DESCRIPTION 揂?
DIMENSION
WORKING
LOAD LIMIT
(SEE PAGE 811)
LBS
5742-21 SMALL METAL GIN WITH CHAIN BINDER
FITS OVER 3 3/4?X 4 3/4?CROSS ARMS
10 5/8?1900 LBS 11.5
5800-5 SAME AS 5742-21 EXCEPT WITH RATCHET AND STRAP 1900 LBS 9.5
5742-24 LARGE METAL GIN WITH CHAIN BINDER
FITS OVER 4 1/2?X 6?CROSS ARMS
11?4500 LBS 24.0
5042 REPLACEMENT NYLON STRAP - 2?WIDE X 44?LONG 0.5

Tags:美国 
作者:山合海融 來源:山合海融


共有評論 0相關評論
發表我的評論
  • 大名:
  • 內容:
  • 上海山合海融商貿有限公司(51082245.com) © 2014 版權所有 All Rights Reserved.
  • 滬ICP備09041411號
  • Powered by 上海山合海融