西班牙LIFASA電容器
您現在的位置:首頁 >> 新產品發布 >> 美國Hastings工具 >> 內容

美國hastings TEMPORARY DEAD END ARM

時間:2013-7-24 14:24:40 點擊:

  核心提示:TEMPORARY DEAD END ARMThe Temporary Dead End Arm enables a line crew to spread conductors off an exi...

TEMPORARY DEAD END ARM
The Temporary Dead End Arm enables a line crew to spread conductors off an existing dead end arm to gain
working clearance to replace and terminate new conductors.
FEATURES AND BENEFITS:
•  Arms are constructed with 3” diameter fiberglass and a foam core to meet most load requirements for tempo -
rary dead ends. 
•  Load limit - 500 lbs. per position or 1,000 lbs. total load limit.
•  Arms have two holes with 18” spacing to accommodate 5/8” diameter hardware bolts for dead ends.  Two alu-
minum sleeves are installed to prevent wear on the fiberglass arm.
•  Steel mounting brackets have multiple holes for adjustment to fit various arm sizes.  Note:  adjustment range is
described for all catalog numbers shown below.
•  Arms can be installed on either the top or bottom of existing cross arms.
•  Two styles are available.  Butt swivel eye to dead end a single phase tap line or a 3 way aluminum alloy equip-
ment mounting bracket for mounting a cutout, lighting arrester and a dead end tap line.
•  When utilizing the butt swivel or the equipment mounting bracket for temporary hanging of a tap line; only
slack spans are recommended with loads not to exceed 150 lbs., providing that the Dead End Arm is being held
captive on the crossarm.

CAT NO

DESCRIPTION

HEIGHT

ADJUSTMENT

WIDTH

ADJUSTMENT

LBS

7674

ARM WITH 3 WAY BRACKET

4 5/8”, 4 7/8”, 5 7/8”, 6 1/8”

3 7/8”, 5”, 6 1/8”

34 .0

7675

ARM WITH BUTT SWIVEL

4 5/8”, 4 7/8”, 5 7/8”, 6 1/8”

3 7/8”, 5”, 6 1/8”

30.0

7676

ARM WITH 3 WAY BRACKET

4 5/8”, 4 7/8”, 5 7/8”, 6 1/8”

6 1/8”, 7 1/4”, 8 3/8”

34.5

7677

ARM WITH BUTT SWIVEL

4 5/8”, 4 7/8”, 5 7/8”, 6 1/8”

6 1/8”, 7 1/4”, 8 3/8”

30.5

11016

CONDUCTOR HOLDER TO FIT ALL DEAD END ARMS

3.2

7678

CONVERSION KIT TO CONVERT ITEMS 7674 AND 7675 TO ADAPT TO ARM WIDTHS

6 1/8”, 7 1/4”, and 8 3/8”. INCLUDES 2 BOLTS, 2 WING NUTS, AND 2 BRACKETS

1.5

7679

CONVERSION KIT TO CONVERT ITEMS 7676 AND 7677 TO ADAPT TO ARM WIDTHS

3 7/8”, 5”, and 6 1/8”.  INCLUDES 2 BOLTS, 2 WING NUTS, AND 2 BRACKETS

1.5

Tags:美國 
作者:山合海融 來源:山合海融


共有評論 0相關評論
發表我的評論
  • 大名:
  • 內容:
  • 上海山合海融商貿有限公司(51082245.com) © 2015 版權所有 All Rights Reserved.
  • 滬ICP備09041411號
  • Powered by 上海山合海融