TEMPORARY CROSS ARM
• The Temporary Cross Arm is an excellent tool for changing cross arms. Solid fiberglass arms
for maximum strength. Rated for 34.5KV phase to phase.
• Two piece assembly makes installation easy and fast
• The mounting base includes a ratchet and strap assembly for lightweight and safety. U-Shape
design fits over pole top pin.
• Fiberglass arm includes two conductor holders with insulators and will accept conductors up to
1 1/16” O.D. Conductor latches are hot stick operable.
• Also available A10039 Large Conductor Holder - 2 5/8” opening
• Captive bolts and washers on arm assembly enable the arm to be mounted to the base.
No tools are required.
• Load limit is 150 pounds per side
| CAT NO |
DESCRIPTION |
LBS |
| 5051 |
64” WIDE, TWO CONDUCTOR HOLDERS, COMPLETE WITH MOUNTING BASE |
27.0 |
| 5053 |
64” WIDE, TWO CONDUCTOR HOLDERS, COMPLETE WITH MOUNTING BASE AND A10039 IN PLACE OF STANDARD
CONDUCTOR HOLDERS |
28.0 |
| 5054 |
74” WIDE, THREE CONDUCTOR HOLDERS, COMPLETE WITH MOUNTING BASE |
33.0 |
| 5055 |
74” WIDE, THREE CONDUCTOR HOLDERS, COMPLETE WITH MOUNTING BASE AND A10039 IN PLACE OF STANDARD
CONDUCTOR HOLDERS |
34.0 |
| A30220 |
ARM ONLY 64” |
22.0 |
| A30233 |
ARM ONLY 74” |
26.0 |
| A30221 |
BI-ARM MOUNTING ASSEMBLY |
14.0 |
| A10039 |
LARGE CONDUCTOR HOLDER, 2 5/8”
OPENING, WITH A30008
INSULATOR |
3.8. |
| 5042 |
REPLACEMENT STRAP |
1.0 |
