BOOM MOUNTED LIFT ARM
• The boom mounted lift arm can be utilized as a lifting attachment when mounted to derrick trucks and
bucket trucks that have lifting capabilities
• It can be used for changing out poles, cross arms, insulators and mid span lifting requirements
• The lift arm can be mounted to a square, rectangular, round, or oval boom by ordering the proper boom
adapters and blocks
• The boom mounting assembly features a ratchet which allows the arm to be positioned under load
• Total movement of arm is 45°
• Fiberglass arm and mast assembly is 3” O.D. with solid foam core
• Fiberglass brace is 1 1/2” O.D. with solid foam core
• Balanced load limit with brace is 1,000 lbs., unbalanced load limit is 200 lbs. per conductor holder
Note: Rating is based on vertical lift - side loading reduces rating.
• If mast only is used with item 21642 4-way roller or item 12666 4-way roller, the load limit is 500 lbs.
• Several adapters for mast are available to fit existing jibs on material handling bucket trucks. Contact
factory with requirements.
BOOM BRACKET WITH RATCHET ASSEMBLY
• Fits booms 8” x 8” to 11” x 11”
| CAT NO |
DESCRIPTION |
LBS |
| 11686 |
BOOM BRACKET WITH RATCHET ASSEMBLY |
38.0 |
MAST ASSEMBLY
• Mast assembly only with quick detach pin
• 5’ x 3” O.D.
| CAT NO |
DESCRIPTION |
LBS |
| 11683 |
MAST ASSEMBLY |
9.3 |
ARM ASSEMBLIES
• Available in 2 sizes
CAT NO DESCRIPTION LBS
13128 ARM ASSEMBLY
9’ X 3” O.D. ARM WITH
11974 SWIVEL SUPPORT / 12006 BRACE
(2) 11387 BRACE CLAMPS / (3) 5034 FOUR WAY ROLLERS
37.0
13129 ARM ASSEMBLY
11’ X 3” O.D. ARM WITH
11974 SWIVEL SUPPORT / 12006 BRACE
(2) 11387 BRACE CLAMPS / (3) 5034 FOUR WAY ROLLERS
40.0
