臺灣標準電機SEW儀器儀表--ST-3602 AC/DC Digital Clamp Meter (Auto Range)
<table id="hinuf"></table>

    1.     
       
      ST-3602   Clamp Meters
      Digital Clamp Meter  
      AC/DC Digital Clamp Meter (Auto Range)  
      ST-3602
      FEATURES
       
       Display 3-1/2 digit, liquid crystal display with maximum reading of 1999.
       Over range indication : "1" is displayed on highest digit.
       Low batery indication : "B" sign appears on the display.
       Response time : approx. 1 second.
       Data hold : for all ranges.
      SPECIFICATIONS
       
      ACA 200/1500, +/- (2.0%rdg+4dgt) : 40 Hz - 1K Hz
      ACV 200/750, +/- (1.5%rdg+2dgt) : 40 Hz - 1K Hz
      DCA 200/1500, +/- (2.0%rdg+4dgt)
      DCV 20/200/1000, +/- (1.0%rdg+2dgt)
      Ohm 200/1500, +/- (1.5%rdg+2dgt)
      Diode Check 0 - 1500 mV, +/- (1.5%rdg+2dgt)
      Buzzer Resistance is less then 100 Ohm
      Conductor Size 55 mm Max.
      Diemensions 245(L) x 70(W) x 41.7(D) mm
      Power Souorce 9V (6F22) x 1
      Weight Approx. 500g (battery included)
      Operating Temperature -10 degree C ~ +50 degree C
      Humidity 85%
      Current Consumption Approx. 10 mA
      Accessories Test leads (AL-26), carrying case (CAC-3600), instruction manual, battery
      特 點
      ● 液晶顯示器31/2位,Z大讀值1999。
      ● 反應時間:每次約1秒。
      ● 過載顯示為"1"。
      ● 讀值鎖定功能。
      ● 電源不足顯示"B"。
      規 格