芝加哥拉纜夾具-用于鋁芯電纜

Submitted by bmelland on Wed, 2012-11-14 11:42
SKU: 1678-20
體重輕，適用于鋁芯電纜安裝工作。
圓形纜托內層提供與電纜圓周面的接觸， 避免線芯受損。
提供環形把手和彈簧鎖，使纜托固定張開，便于放置電纜線。
Lightweight grips designed for use on aluminum conductors in distribution work.
Round jaws shaped to provide maximum contact with circumference of cable
警告：拉纜夾為暫時安裝使用，不可長期處于錨定狀態。
警告：當使用或靠近電源線時，需先使拉纜夾處于落地絕緣以及隔離狀態后再進行拉纜工作。
警告：不可C過載重量。
警告：必須使用與尺寸和類型匹配的拉纜夾具。
警告：每次使用前，需先清潔纜托并檢查其工作狀態，避免操作時滑落。S
Grips are to be used for temporary installation, not for permanent anchorage.
When used on/or near energized lines, ground, insulate, or isolate grip before pulling.
Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
Do not exceed rated capacity.
Always match proper size and type of grip to application.
Always inspect equipment before use.
Do NOT exceed maximum safe load as listed on the label attached to the product.